loading

  +86 18988945661             contact@iflowpower.com            +86 18988945661

Several lithium-ion batteries can not enter the processing method of electricity

  Author :Iflowpower – Portable Power Station Supplier

1, mobile phone lithium-ion battery can not enter electricity What to do (1) Mobile lithium-ion battery due to changes in the ambient temperature change, most of which is because the lithium-ion battery itself is not a low temperature battery, in turn to a low temperature environment When using, due to the low temperature, the internal freeze is caused, causing the internal resistance of the battery to decrease, so that the discharge capacity has dropped sharply, and even discharged. This can go to a place where the temperature is proper. After a period of time, the battery will restore partial capacity.

If used in use, the battery will cause serious attenuation or scrapped by low temperature analysis. (2) When the mobile phone battery is often charged, the battery caused by this behavior is charged if the charger is normal, then the battery is often at a high active state, causing the battery to be too fast and life. This can only change the battery.

(3) Because the charging interface has caused possible short circuits, the mobile phone battery protection board is triggered by the protection function and cannot be charged. This should be maintained for the charging interface. (4) The phone can be used with electricity, it is easy to use, and it is so fast that it is not electricity or straight, this situation is basically the battery may have a drum or scrapped.

This can only be replaced. (5) Mobile lithium-ion batteries are not charged after the outdoors without charging, it is not charging for a long time. At this time, the lithium-ion battery is still in low current self-discharge, time is too long, or the battery power is exhausted, that is, it is too low, causing the battery to be too low, charged.

At this time, the charger (pressure difference should not exceed 3V) can be activated, this should be concerned, and once the battery can be recharged, the battery will be charged to charge. (6) There is also a problem that the charger has a problem, so it is proposed to check the problem of charger first. 2, electric car lithium-ion battery can not enter electricity how to do (1) Electric car pool due to changing the ambient temperature change, this situation is mostly because electric car battery itself is not a low temperature battery, in turn to a low temperature environment When using, due to the low temperature, the internal freeze is caused, causing the internal resistance of the battery to decrease, so that the discharge capacity has dropped sharply, and even discharged.

This can go to a place where the temperature is proper. After a period of time, the battery will restore partial capacity. If used in use, the battery will cause serious attenuation or scrapped by low temperature analysis.

(2) Electric vehicle lithium-ion batteries often completely use the amount of energy, which is often said too much depth discharge, the battery caused by this behavior does not advance the electricity, then the battery is often active because it is often active In the state of electricity, the battery is attenuated too fast, life is used. This can only change the battery. (3) Because the charging interface has caused possible short circuits, the electric vehicle lithium-ion battery protective plate is automatically triggered without charging, this to be maintained for the charging interface.

(4) There is also a problem that the charger of the electric vehicle lithium-ion battery has a problem, so it is proposed to check the charger. 3, car starting lithium battery battery can not enter electricity how to do (1) How to start lithium battery because the ambient temperature change is caused, most of which is because the lithium-ion battery itself is not a low temperature battery, in a low temperature environment When using, due to the low temperature, the internal freeze is caused, causing the internal resistance of the battery to decrease, so that the discharge capacity has dropped sharply, and even discharged. This can go to a place where the temperature is proper.

After a period of time, the battery will restore partial capacity. If used in use, the battery will cause serious attenuation or scrapped by low temperature analysis. (2) Because the charging interface of the car starts the lithium battery, there is a possible short circuit, so that the car starts the lithium battery protection board self-trigger protection function and cannot be charged.

This should be maintained for the charging interface. (3) The car starts the lithium battery battery after a period of time, then goes to sleep. This started could not be charged, and for a long time, it can activate the battery in 3-5 normal charging discharge cycles, restore normal capacity, and proposes to use standard measures to charge this natural activation method is the best.

(4) There is also a problem that the charger has a problem, so it is proposed to check the problem of charger first.

GET IN TOUCH WITH Us
recommended articles
Knowledge News About Solar System
no data

iFlowPower is a leading manufacturer of renewable energy.

Contact Us
Floor 13, West Tower of Guomei Smart City, No.33 Juxin Street, Haizhu district, Guangzhou China 

Tel: +86 18988945661
WhatsApp/Messenger: +86 18988945661
Copyright © 2024 iFlowpower - Guangong iFlowpower Technology Co., Ltd. | Sitemap
Customer service
detect