Author ：Iflowpower – Portable Power Station Supplier
1) Check and supplement of the battery liquid surface, the motorcycle battery liquid must be on, lower, must not be lower than the lower limit, lower than the lower limit to supplement. When supplement, the dilute sulfuric acid may not be injected, otherwise the battery will be damaged due to too high electrolytic solution concentration. Don't add tap water, river water, etc.
Because of which contains calcium, magnesium plasma and impurities. 2) The state check before the battery is charged, check whether the battery voltage of the motorcycle is lower than the standard value, and if the conditional detectable proportion of the electrolyte is less than 1.28 (20 ¡ã C).
To observe the inside of the battery, if there is one or several battery cells, the polar is white, or the substance accumulation in the bottom, or the plate warpage should be replaced. If the battery terminals are dirty or oxidized, the wire is scanded. If the cleaning is not clean, drilled a less electrolyte corrosive surface and wipe it with water.
3) The charging of the battery, the maintenance of motorcycle battery maintenance directly affects the life of the battery. When charging, the current is not too big, it is recommended not to use fast charge. When charging, the non-sealed battery should open the plug, and in a good ventilation, it is far from the fire to prevent hydrogen due to charging.
4) After the battery is charged, the battery is charged after the battery is allowed to stand after standing for 30 minutes. Otherwise, it cannot accurately reflect the state of the battery. 12 volts should be reached or higher than 12.
8 volts. Continue charging if it is below 12.7 volts.
If it is below 12 volts, the battery is damaged and should be replaced.
Copyright © 2022 iFlowpower Technology Company Limited - All Rights Reserved.