Method for activating new lithium battery

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - Mea Hoolako Uku Uku

Smartphone is widely used, social networking on new mobile phones must be filled with 8 hours, completely discharge, repeatedly can fully activate mobile phone, so that mobile phone battery maximum capacity. In fact, these methods are not to protect the lithium battery, but will cause damage to it. The best way to protect the battery is actually frequently used, often charge repeatedly.

Xiaobian tells you to activate the activation method of the new lithium battery method and lithium battery "starving". The activation of the new lithium battery method does not require a new lithium battery for 10 hours of charging to activate battery activity, and activate according to normal charge and discharge. For the "activation" problem of lithium batteries, many statements are: charging time must be more than 12 hours, repeated three times in order to activate the battery.

This "first three-three charging 12 hours more" said that it is obvious to continuing from nickel batteries such as nickel-cadmium and nickel-hydrogen. ਇਸ ਤਰ੍ਹਾਂ ਦੀ ਕਹਾਵਤ, ਤੁਸੀਂ ਕਹਿ ਸਕਦੇ ਹੋ ਕਿ ਸ਼ੁਰੂਆਤ ਦੁਰਵਰਤੋਂ ਹੈ। The charge and discharge characteristics of ferrithium batteries and nickel batteries can be very different, and you can tell you very clearly.

All serious formal technical information that Xiaobian's review emphasizes the charge and over-discharge will for lithium batteries, especially Liquid lithium-ion battery causes huge damage. Therefore, the lithium battery charging is preferably charged according to standard time and standard method, especially for more than 12 hours of long charging. Typically, the charging method described in the instruction manual is the standard charging method.

In fact, the shallow shallow charge is more beneficial for lithium batteries, only the need for a deep fence only when the power module of the product is lithium battery. Therefore, the products that use lithium electricity supply do not have to be in the process, everything is convenient, charging, do not worry about affecting life. Battery car lithium battery "Starry" activation method is starved to death, it is not charged for a long time, and the charger does not respond when charging again, and it is not possible to measure the charging current, even if the battery is still unable to use the battery.

Here is five more good methods to save most of this "starving" battery car lithium battery. Note that it is most, not 100%. First, series method.

A 12 volt battery of a normal voltage is connected in series on the entire group of batteries. For example, the original car is a battery of 48V-20AH, then we will join a 12V-20AH battery in series. The 12V battery voltage of a power is about 13V.

After in series, the voltage of the entire set of batteries can then be charged with his original charger, so that the electric charge can be put in, after plugging in the charger, charger Is a red light, at this time, you can enter the electricity. When the charger is turned to the green light, take the other series of batteries. Then charge it properly.

Second, Parallel Law. This method is slightly troublesome. For example, the vehicle originally a battery of 48V-20AH, and we will join a group, 48V-20AH battery.

Everyone knows the voltage across the parallel circuit, and the high voltage end will flow into the low voltage end. This method is also a method used by many battery dealers in detecting a battery that is completely uncharacted. Then charging can also achieve the purpose of charging.

This principle keeps, in series, the principle is almost. Also upgraded the voltage of the whole group. Third, low voltage charging method.

Charging the small model of the charger. For example, it is a group of 60V-20AH batteries, then we charge with 48V-20AH chargers. In this case, it can be charged.

The principle is also similar to the first, and the voltage of the charging voltage and the battery is closer. Fourth, single battery charging method. Charging a single battery with a 12 volt motorcycle charger, can activate the battery, but this charging is slow, it is generally charged for more than 7 hours, the battery voltage will rise slowly to 12V.

If all the individual charges take time. V. Special charger method.

Tianneng charger is automatically identified by battery voltage, no matter how many volts of a set of battery voltages, you can automatically identify the voltage, he can charge it in. For example, the original car is 60V-20AH battery, now only 30V is not arriving, it can be charged inside. As the voltage increases, it is also suitable for a higher level of voltage, and then charging the battery.

Mobile phone lithium battery "starving" activation method 1, overvoltage method. Try 2 times or 3 times voltage, you can reactivate applicable. The overfixture is: the mobile phone battery is generally 3.

7-4.7V, you can use 6V, you can't use 9V. Any available battery 4-6.

Wire, it is best to use universal monitoring. If you have no maintenance experience, you can. Connect the available batteries, charge the positive and negative pairs of mobile phone batteries with wires.

2, frozen method. If you can't turn your electricity, you can use the paper bag, and it is well used in plastic bags. Put it in the refrigerator for 1 week, take it out for 2 days.

Put in the mobile phone. If you can boot, you will charge it immediately. 3, wiping method.

For mobile phone batteries that are not very serious, use clean eraser to gently wipe the battery and mobile phone contact surface contacting the phone, the metal surface of the mobile phone battery after use has a certain degree of oxidation, resulting in a good contact, battery usage Short, and rubber can erase the surface of the oxide layer so that the battery and mobile phone contact. However, if you come back, if you want to be good in the state of the lithium battery, you still have to pay more attention to your mobile phone battery or battery car battery in usual use, so that the battery is better for us.