How can I make the battery maximize the use?

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - Dobavljač prijenosnih elektrana

1, resolutely do not need inferior chargers! Resolutely do not need inferior chargers! Resolutely do not need inferior chargers! Resolutely impover the model without matching charger. The charger technology is not complicated, but the inferior charger circuit board, the electronic component will not be the best, even unqualified, and facing the voltage of 220V, these unqualified components will heat generation caused by itself and battery damage. The model does not match the charger will cause the battery to be filled.

2, charging frequency and time to maintain the maintenance of the battery is also important. When the amount of electricity is less than 30%, it should be charged in time, and when it is frequently charged to the battery. Because long-term depth discharge or too light discharge can affect battery performance.

When the battery is used to charge 70%, the battery is charged, the battery performance is optimal. 3. If the battery is not used for a long time, the first should be filled with electricity, then replenish the electricity regularly.

During the storage process, due to self-consuming power, the power will gradually decrease, if it is not possible to get supplementation will affect the performance of the battery, it is recommended to make a supplement every 1-2 months. 4, the best environmental temperature is 25 ¡ã C. Now most chargers do not adapt to the ambient temperature automatic control system, so most chargers are designed according to the ambient temperature of 25 ¡ã C, so it is better to charge at 25 ¡ã C.

Otherwise, it is inevitable that there is a problem in winter under charge and summer overcharge. When charging, it is best to arrange the battery and charger in an environment with ventilation and temperature. 5, battery regularly, deep discharge is also conducive to activating the battery, can slightly increase the capacity of the battery.

The method of deep discharge is to ride the first undervoltage protection under the normal load of flat pavement. Note that we especially emphasize the first undervoltage protection. After the first undervoltage protection, the battery will rise after a period of time, and restore to the non-output state, this time, if the battery is used, it is very harmful to the battery.

After completing complete discharge, fully charge the battery. It will feel that the battery capacity is improved. 6, can not overload overweight, try to prevent emergency brakes.

Frequent brakes will affect the stability of the brake spirit, the battery capacity; the speed should not be too fast, the faster the speed, the greater the loss of the battery. Use slide as much as possible. When the next slope, use as much as possible to cut off the breakdown in advance.

When you are about to encounter the traffic light, you will enter the slide in advance, minimize brakes. When starting, it is best to join riding boost, not only increase the start speed, but also reduce battery power loss and life injury. 7, often remove dust, dirt on the battery case, prevent sunlight direct electric car battery, and prevent rainwater into the battery case, these will affect the performance of the battery and charger.

8, prevent high temperature exposure, electric cars are strictly prohibited in the sun. Environmentally high temperature will increase the internal pressure of the battery to make the battery limit valve to be automatically opened, and the direct consequence is the water loss of the new battery, and the battery excessive water will inevitably cause the battery activity to decline, accelerate the plate softening, charge Fever, housing drum, deformation, etc. 9, the summer is high, if the electric car is driving for a long time or exposed to the sun, it is easy to increase the temperature rise, the motor is heated, and even causes the battery crack or deformation, thereby causing a circuit failure, which in turn leads to spontaneous combustion.

Be sure to wait for two or three hours to cool after cooling; when charging, the importance of the car is aging, preventing short-circuit conditions. 10 Electric cars should try to remove the battery separately when charging. The charging line in the parking shed should be selected to select the appropriate line diameter.

The line laying should be fixed and installed. The vehicle charging should prevent the charging time from being too long, and the charging time must not exceed 10 hours. 11, do not use fast charger charging.

At present, electric motor battery is generally lead-acid batteries, but the fast charger in the market uses high-voltage large current pulse charging. When the large current is charged, the polarization speed of the battery polar plate is accelerated, and the battery life is reduc.