What is precautions in the rack-type UPS lithium battery discharge and use

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - ተንቀሳቃሽ የኃይል ጣቢያ አቅራቢ

Rack UPS Lithium Ion Battery Discharge Notes: 1. First, Before the discharge, the rack UPS power supply is probably the backup time, so when making discharge, there is a preparation, the alert is discharged to the backup time. I don't know, causing the downtime, causing damage to the equipment.

2. If you can see the UPS battery, the first-graphic battery is not a distinctly deformed and leak night. 3.

If the rack UPS power supply itself has an automatic discharge function setting time, the proposal makes the UPS uninterrupted power supply, so that the battery can be initially determined that the battery has the ability to discharge. 4. When people are discharged, please observe the decline in the UPS battery voltage at all times to restore the mains input.

5, discharging the rack UPS to solve the solution without having to complete the capacity of the lithium ion battery, only 3 points of the rated capacity is 2, OK, discharge as long as the use of the battery. 6. If it is a mid-high power rack UPS power supply, the general rectifier and bypass input switch independently design, proposes the OFF rectifier switch, without the municipal power input switch of the OFF user, the unit, the battery is displayed, UPS You can transfer to bypass mode immediately.

Overview of the rack UPS lithium-ion battery use: ● Ambient temperature ambient temperature on the rack UPS battery is large, the ambient temperature is too high, which will cause the battery to overcharge the gas, the ambient temperature is too low, then Make the battery to charge the battery, which will ring the battery life. Therefore, it is generally required that the ambient temperature is about 25 ° C. ● Discharge depth discharge depth impact on rack UPS power service life is also very large, the deeper the discharge depth of the UPS battery, the less the number of cycles, so the depth discharge should be disposed during use.

● Using the environment UPS usage environment should be installed in clean, cool, ventilated, dry place, which can reduce the corrosion of harmful dust on the internal line of the rack type UPS power supply; also guarded the sun, the heater (such as winter Effect of heaters) or other radiation heat sources. UPS should be placed correctly, unlaveled angles. ● The charging voltage is in the state of charge due to the normalization of the UPS battery, and the electricity will be discharged.

If the charging voltage is too high, the battery will be charged, and it will make the battery insufficient battery.