loading

  +86 18988945661             contact@iflowpower.com            +86 18988945661

Method for how to use lithium battery in a lithium battery equipment instrument

著者:Iflowpower – Provedor de central eléctrica portátil

Prohibit hyperpower use. It is forbidden to use electric vehicles that are used to exceed battery nominal power and use on related equipment, for example, battery design power is 1000 watts, which is forbidden for more than 1000-watts of electric vehicles and other related equipment. Recommended shallow charge.

Lithium battery has no memory effect, suggests shallow charge. ShallowProse When you use it as much as possible, don't put it again, you will be fully charged or fully charged. Lithium batteries are discharged to 50% each time, charging to 90%, so that the cycle time and battery life is much greater than the time from 0% to 100% each time.

No low temperature charge. The lithium battery is prohibited from charging at 0 degrees. When the battery is less than 0 degrees, the battery must be placed in a normal temperature (25 ¡ã C) to stand for 12 hours and then charging.

Low temperature charging will seriously damage the internal structure of the battery, and the battery impedance will be much greater than the impedance of the normal temperature battery. The forced charging will lead to an uncontrollable factor in the control. Therefore, it is prohibited to charge at low temperatures.

Boat water. Lithium batteries have made some routine waterproof measures before the factory, which is strictly forbidden to soak the battery in the water or in the conductive liquid. Severe may cause short circuit, protection system damage, and failure.

Prohibition of long-term short circuit or super power. Lithium batteries can only be used in accordance with the instructions, it is strictly forbidden to use equipment with motor power. It is strictly forbidden to block the motor.

Blocking will increase the battery current output, causing battery overheating, electronic system over temperature and wire high temperature caused heat loss. Prohibition of rapid acceleration, rapid brake. When accelerating acceleration, the motor speed increases rapidly, which will increase current instantaneous output.

Rapid brakes can cause the motor against the rechargeable battery, and the reverse charging current may cause battery protection failure. During use, as slow acceleration, the speed is not too fast, the brake is easier. No vehicle overload.

For example, the battery used for three-wheeled and quadront baton, when the vehicle is overloaded, the same road condition, the motor needs to output more power, requiring a battery to provide larger current. When you encounter a long slope, the battery and the protection system will exceed power, which will trigger battery failures or even malignant events. It is strictly forbidden to throw the battery into the fire or heat it.

It is strictly forbidden to tap the battery. No disassembly battery. Lithium batteries belong to voltage devices, there is related circuits inside, and non-professional personnel may cause safety hazards.

Therefore, non-professional is prohibited from removing the battery. If there is a fault, please contact the sales outlet.

Babak sareng kami
artikel anu disarankeun
Pangaweruh Warta Ngeunaan Tatasurya
euweuh data

iFlowPower is a leading manufacturer of renewable energy.

Contact Us
Floor 13, West Tower of Guomei Smart City, No.33 Juxin Street, Haizhu district, Guangzhou China 

Tel: +86 18988945661
WhatsApp/Messenger: +86 18988945661
Copyright © 2025 iFlowpower - Guangdong iFlowpower Technology Co., Ltd.
Customer service
detect