Power lithium battery problems show that recycling and re-use prospects

2022/04/08

  Author :Iflowpower – Portable Power Station Supplier

A few days ago, Honda took the lead in establishing a cyclic utilization mechanism of mixed power vehicle nickel-hydrogen battery in the world, and rare earths extracted in the nickel-hydrogen battery of hybrid vehicle as a nickel-hydrogen battery material into practical applications. Honda's rare earth resource recycling method has caused extensive attention in the industry, and people have also triggered discussions about the recycling technology of dynamic lithium batteries. With the increasing depletion of global oil reserves and the deterioration of the environment, new energy vehicles will become the development direction of future cars.

Lithium ion, nickel-hydrogen, etc. But at the same time, some issues are also increasingly revealed: such as nickel, cobalt, rare earth resource bottleneck problem, and environmental pollution problems of the scrap dynamic lithium battery, etc. According to statistics, my country's 2010 battery industry consumes approximately 23,000 tons, about 4,000 tons of metal cobalt, mixed rare earth metal, and the average life expectancy of the dynamic lithium battery is about 3 to 8 years, and a large amount of powerful power lithium batteries.

The shortage and environmental problems are growing. Power lithium battery problems showing recycling and reused prospects. Visual environmental benefits are clearly important for power lithium batteries.

The market price of cobalt, rare earth, etc. will continue to rise, will seriously affect the manufacturing cost of dynamic lithium batteries. Taking the nickel hydride power lithium battery as an example, the nickel content of the waste nickel-hydrogen power lithium battery is 30% to 50%, the cobalt content is 2% to 5%, the rare earth content is 5% to 10%, which has high recovery economic value.

The model specifications of the power lithium battery products are unified, the component content is stable, and the application market is easy to manage. These are a very convenient conditions for their recovery. It can be foreseeable that in the future, the power lithium battery recovery cycle use will become an emerging industry, and the recycling and regeneration of the failure dynamic lithium battery can not only bring huge environmental benefits, but also brings considerable economic benefits and social benefits.

This can not only effectively control the battery cost, but also play a forward positive effect for the popularity of hybrid vehicles. The rare earth resources used in the nickel-hydrodynamic lithium battery are mainly mixed rare earth metals such as ruthenium, ruthenium, 镨, 钕, is the form is to form a hydrogen storage alloy anode active material by melting with nickel, cobalt, manganese. It can be seen that the chemical composition in the nickel-hydrogen battery is very complicated.

Compared to other batteries such as nickel-cadmium batteries, it is much more difficult to recover. Honda and Japanese Heavy Chemical Industry Co., Ltd.

jointly developed a nickel-hydrogen battery recovery production process, extracting mixed rare earth oxides from the failure product, further molten salt electrolysis is a mixed rare earth metal that can be used to prepare a nickel-hydrogen battery negative electrode material. This approach has more cost and component advantages than rare earth mining from mines. In addition, the mixed rare earth is obtained by melt salt electrolysis, and the complex rare earth separation purification is also prevented from being subjected to complex rare earth separation, and the traditional recovery process flow is reduced.

This loop reuse will become an important recovery model for processing electronic appliance waste in the future. Domestic "White District" At present, the domestic nickel-hydrodynamic lithium battery market has not yet formed climate, the production and sales volume is not large, the number of invalid batteries is not much, and the recovery of nickel-hydrogen power lithium batteries is also in the technical research stage. The recovery of ordinary civil batteries is weak, and the recycling system is not perfect due to environmental protection awareness.

It is not currently less than 2% of the overall domestic recovery. Most ordinary civilian waste batteries are discarded by consumers and domestic garbage without recycling. In addition, there are many varieties of ordinary civil batteries, including alkali manganese batteries, nickel-hydrogen batteries, nickel-cadmium batteries, lithium-ion batteries, etc.

, and increased difficulty in recovery sorting treatment. The model specifications of the same variety battery and the ingredient content are also large, which further increases the difficulty of recycling. In addition, if you want to use the battery manufacturing, it is difficult to form a large-scale recycling industry chain due to the control, batch stability and consistency of the impurity content.

Some of the domestic recovery of waste batteries, the technical route for treating nickel-hydrogen batteries is generally produced by wet metallurgy, cobalt chloride, or ultrafine nickel powder, cobalt powder, cobalt powder, cobalt powder, cobalt powder, Cobalt ball nickel, three-yuan material front body, etc. More than Jiangxi, Jiangsu and Shandong rare earth recycling company, an important part of the recycling business of rare earth magnetic materials, after separating rare earth oxides, further smelting into metal. At present, there is no real battery rare earth recycling company in China.

Nankai University has developed a negative rare earth storage alloy powder regeneration technology, and the collected hydrogen storage alloy waste has been pretreated, and the harmful impurities in the waste are removed, and a certain price metal is added, then vacuum smelting, directly obtaining nickel hydrogen directly Qualified hydrogen storage alloy required for battery manufacturing. This production process is simple, safe and reliable, no pollution, and the recycling rate of alloy elements is high, low cost. However, this hydrogen storage alloy waste recovery has high requirements, the product quality is unstable, the product impurity content is high, product performance and raw global performance have some difference, so this recovery method is subject to certain restrictions.

Advanced Innovation Materials National Engineering Research Center has also carried out a series of studies in recent years, and the research ideas are the preparation of the failure of nickel-hydrogen power lithium battery treatment into a negative hydrogen storage alloy material. It can be reused to the production of nickel-hydrogen power lithium battery, and two invention have been applied. The scale application of the recycling technology can reduce the production cost of the nickel-hydrogen power lithium battery, and the development of the domestic hybrid automotive industry will play a positive use.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English