Author :Iflowpower – Portable Power Station Supplier
Traditional open storage products must pay attention to the following aspects: 1 Note, density, and charge levels, especially those closely related to the charging system, and if the amount of charge is large, the battery is too water, easy The active substance that causes the plates falls off, causing the bottom short circuit to shorten the life of the battery, and if the amount of charge is small, it is easy to cause the battery's loss of electricity, and the battery can cause the polar plate inletless sulfuric acid. Saltization, its performance is that the voltage rises rapidly, it is complete, and the voltage drop is rapid when the discharge is discharged. 2 The purity of the electrolyte, generally uses a special electrolyte or replenishing liquid perfusion, which is strictly forbidden to replace ordinary sulfuric acid and tap water.
3 daily use surface remains clean, exhaust port. 4 When you place it, you should be fully charged, and it is added for three months. Related to sealing valve lead-acid battery daily attention to the following aspects: 1 pay attention to the scope of the charging voltage floating in use, the voltage is generally controlled in 2.
15±0.1V / single, the voltage is generally controlled at 2.35 when the cycle is used±0.
1V / single, if the specification is required, it should be operated in accordance with the instructions. 2 Note that the use of ambient temperature, generally no more than 30 degrees. The adjustment of the voltage should be strengthened when the temperature changes.
3 The products related to different manufacturers are not mixed, and the new and old products of the same manufacturer are not mixed. 4 Sealed valve lead-acid batteries preferably do not open the cover to supplement the electrolyte and replace the safety valve.