UPS uninterruptible power supply how to replace battery

　　Author ：Iflowpower – Portable Power Station Supplier

1. Make sure the input power supply of the UPS power battery host, the new and old battery registration inspection, the seal of fire protection system in the machine room, prepare carbon dioxide fire extinguishers and other related work. 2.

Replace the battery host, old battery pack, battery monitor and other equipment, especially for each layer of battery, the wiring of the battery monitor, to draw a tag, painted. Ensure that the effect after the battery pack is replaced and the original situation is consistent. 3.

After all are ready, disconnect the connection switch between the UPS host and the battery pack, so that the UPS host and the battery are broken to open, ensure that the staff is safe when replacing the battery. 4. Disassemble the battery of the original UPS battery pack, battery replacement executive engineer is responsible for battery disassembly, related assistant technicians carry out the handling of new and old batteries.

When the old battery is removed, the dismantled battery connection line and the battery terminal screw is completely placed, ensuring neat and cleaning in the machine room. 5. After the old battery is removed, the old battery and the old battery are arranged in the position of Party A.

6. Place the new UPS battery pack assembly in the development position, and start installing a new battery, place the new battery on the battery frame, making the new battery on the battery frame, direction adjustment is the best. 7.

After the UPS host debugging is normal, disconnect the input power switch of the UPS host, simulate the market failure interruption, the probe UPS system can be normalized by the main power supply to the battery pack, ensuring normal operation within the equipment cabinet. 8. After the UPS battery replacement work is completed, clean up the UPS room, clean the debris, and ensure a good environment of the UPS room.