The battery does not enter the electricity, the electric vehicle starts without reacting?

　　Author ：Iflowpower – Portable Power Station Supplier

What is a broken path? The disconnection and performance disconnection refers to the failure of the internal connection of the battery so that the battery is connected to the battery. Mainly manifested as: When charging, the charger has been present in a green light, and the vehicle and instrument panel have no response when the vehicle starts. How to detect battery circuit? 1.

First check the battery stationary voltage 2. Charge the battery with a qualified charger 3. Discharge the battery resistance wire 4.

The charger is charged to the battery to charge the battery. If there is one of the above three phenomena: charge the electricity The charger presents a green light; the discharge is also no reaction (no current); the connection is the positive and negative fire without spark generation, that is, it can judge the generation of broken circuit in the battery. Small people motion 2.

png Tips: Micro-circuit batteries are in use during use, because the electric vehicle is specifically manifested to be electricity, there is no electricity, so for such a battery, the vibration should be vibrated, and if the vibration is discharged, then discharge, then Detection according to the detection method of the circuit. The reason for the battery disconnection? The battery disconnect is mainly due to external factors such as battery life and cycling road conditions. First, the battery itself: Battery in the process of production and assembly, in some key procedures, especially in the process of welding, there is a phenomenon in breadens welding, leakage, is one of the important reasons for the battery disconnection.

Second, external factors: 1. Battery unreasonable assembly The factors of cycling roads, unlimated and bumpy pavements will have a large impact on the internal battery; Melting, causing battery discharging. How to circumvent the battery circuit? Preventing the disconnection method 1.

Rationally assemble the battery in accordance with the regulations, try to adopt fixed flatness, avoid superimposing, there should be a certain void between the battery and the battery; 2. The connection of the installation wire and the battery pole pillar should be firm, no loose, wire To meet the requirements, you can't be too fine; Go off the bus. .