Polymer lithium battery drum package reasons

　　Author ：Iflowpower – Portable Power Station Supplier

Originally by one: The battery is chemically reacted at the charge of the positive and negative plate and the water in the electrolytic plate and the water in the electrolytic plate, thereby reducing the positive electrode plate to the lead, the negative electrode plate is reduced to pure lead, the chemical equation is as follows: charging reaction Chemical equation (charging reaction) When the battery is almost 2.3V, the battery will precipitate the gas (the precipitation gas voltage of the lead calcium plate is 2.3V, the precipitation gas voltage of the lead antimony plate is 2.

35V). Everyone knows that when the water boiled, the water vapor is very hot, and the strength is also very large, you can start a train (steamed car). This theory uses our battery.

It is also the same. When the gas is paid, the battery temperature will increase, and if a large quantity of gas will cause no enough space inside the battery to store these gases, it will cause the battery to bully. Original 2: the battery is high.

When a battery is high, when the current is constant, the voltage will be high (voltage = current * resistance). What we can see is that the red light does not jump in the battery when charging is very hot. Originally: electric vehicle charger does not meet the requirements.

When we use the electric vehicle charger parameters above the parameters such as the voltage of our battery, it is possible to fill the battery! Intimate small offer: 1: Use electric vehicle chargers that meet the requirements to do special charger tests to battery repair points. Many places in today are free test! 2: Regularly check the battery, do maintenance to the battery, which can extend battery life while increasing the use of electric vehicles!.