Maintenance and maintenance introduction of 12V lithium iron phosphate ion battery pack

2022/04/02

  Author :Iflowpower – Portable Power Station Supplier

● After completing the battery installation, before the battery is installed, the battery should be filled with the battery before discharge, and then use it. After the battery is fully charged and discharge, the battery can reach the maximum capacity. ● When the battery is low, it should be charged in time, which will benefit to extend the battery life.

If it is not charged in time, the battery will affect the battery life in a long time. If the battery is taken for a long time, it is best to make the battery in a half-electric state, and charging the battery once every 2 months, the charging time is one hour. ● The battery should be installed in air circulation, dry, clean environment; when charging, the fire source should be guarded, and the flammable items are close to and disconnected (enclosed electrical equipment).

● The operating ambient temperature of the battery is 5 ~ 40 ° C (the best working ambient temperature is 15 ~ 35 ° C). If this temperature range, the battery performance may vary, and the intuitive performance is battery capacity, or equipment Operation time changes, this is a normal phenomenon. ● Clean battery housing using an organic solvent.

When the battery is accidentally fired, carbon dioxide can not be used, but the fire extinguishing appliance or sand extinguishing of carbon tetrachloride should be used. ● The battery is a consumable product, and the life of the battery is limited. Please replace the battery in time when the battery capacity is less than 80% of the rated capacity.

Charger uses appropriately reasonable charging to extend the life of the battery pack, and the barbaric charging will have a great impact on battery life. The lithium ion battery pack is strictly prohibited from charging from the discharge junction, and it is not necessary to use a special charger to charge from the charging socket. If the original charger is broken, it is best to buy the original model of the charger.

The original prototype is always more suitable for more secure. When the charging indicator on the charger stops scrolling, remove the charging plug in time to avoid the battery overcharge.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English