How to maintain and daily maintenance of UPS batteries

　　Author ：Iflowpower – Portable Power Station Supplier

1. Please note that the temperature should not be more than -20 ¡ã C ~ + 40 ¡ã C in the range. 2.

The battery must be kept in a fully charged state when the battery is kept. If you lose a part of the capacity due to self-discharge during transport or during storage, please add electricity. 3.

For a long time, in order to make up for the self-discharge during the storage, please make. When kept in more than 40C, there is a bad influence on the battery life, please prevent it! 4. Please keep in the dry low temperature and well ventilated place.

5. If the battery pack is inadvertently wet during the storage or transfer process, the package should be immediately removed to prevent the wet carton from moisturizing the conductor caused battery discharge or burn the positive terminal. 1.

Check the battery regularly, if it is found that there is a situation such as dust pollution, please clean the sheet with water or warm water. Do not clean with organic solvents or oils such as gasoline, banana water, and use the chemical fiber cloth. 2.

When the floating charge, the indicator value of the total voltage or indicator disk during the battery charging process should be investigated and treated by the base value (0.05V / mononege "as shown in the following table. Even if the UPS uses the same battery technology, the battery life of different manufacturers is very different, this is very important to the user because the replacement of the battery is high (about 30% of the price of UPS).

Battery failure will reduce the reliability of the system, which is very annoying. Temperature has a great impact on the natural aging process of the battery. Detailed experimental data indicates that the temperature is 5 degrees per rise, the battery life is 10%, so the UPS design should allow the battery to maintain as much as possible.

All online and backup / online hybrid UPS is larger than the backup or online interactive UPS runtime (so the former is to install the fan), this is also an important one for the relatively long replacement or online interactive UPS battery replacement cycle. reason. Battery charger UPS is very important, battery charging conditions have a great impact on battery life.

If the battery has been in constant voltage or floating electrical charge, the UPS battery life can maximize. In fact, the life of the battery charge is much longer than the life of a simple storage state. Because battery charging can delay battery natural aging processes, UPS should keep battery charging regardless of operation or downtim.