How is the lithium battery assembled?

　　Author ：Iflowpower – Portable Power Station Supplier

Lithium battery packaging method 1, select a suitable battery, battery type, voltage, internal resistance matching, please balance the battery before assembly. Shear electrode and punch. 2, calculate the distance according to the hole, the scripture insulating board.

3, on the screw, please use the flange nut to prevent the nut from falling off, and good screws are connected, you can fix the battery pack. 4, when connected and soldered, connect the voltage capture line (equalization line), do not take the protective plate to prevent accidental burning. 5, insulating silica gel is fixed again, this silica gel time is curing.

6. Place the protective board, if you have forgotten the balance of the battery, this is the last chance before the battery packaging, you can balance through the equalization line. 7, use the insulating plate to fix the entire lithium battery pack, with nylon tape packages, nylon tape is more stress, please pay attention to the outer casing of the steel material, the outer shell of the steel material is very beautiful, but the battery core combination is difficult to guarantee Some outer shells have not been treated, which is likely to scratch the battery cells, or even causing accidents because of insulation.

8, re-encapsulate the battery, please keep the battery and protective board, our battery cells are measured by 1 meter height and still guarantee normal work. 9, the final package is completed, the output input is used in silica gel wire. Because it is a battery pack of iron lithium battery, 48V20AH battery pack, the battery pack will weigh 9 kilograms, and the weight is half of the same acid battery.

10, the tutorial is completed, we have made test after the battery is completed, and we can meet our requirements.