Analysis of UPS Battery Uninterruptible Power Supply Description Precautions

　　Author ：Iflowpower – Portable Power Station Supplier

UPS manufacturers parse UPS uninterruptible power supply equipment use precautions. The UPS power supply is a power supply device with a good protection. As a UPS power supply manufacturer, the UPS uninterruptible power supply produced should have a very stable effect, and can continue to supply sustained to equipment in unstable or even interrupted maintenance.

powered by. So in order to keep the UPS power supply to maintain a good use effect, and extend the service life, what should I pay attention to? UPS manufacturers parsing UPS uninterruptible power supply equipment usage 4, pay attention to the rated power UPS uninterruptible power supply equipment has rated output power, so in order to effectively extend the service life of the UPS power supply, the company should pay attention to the size of the rated power in use. Do not run for a long time to run in full, do not allow the UPS power to run in the state of overloaded.

2, pay attention to the protection of the protection because the lightning strike is a natural enemy of all electrical appliances, the UPS power supply is no exception. Because the sensing high potential pulses in the lightow will enter the UPS uninterruptible power supply, the microelectronic device in the UPS power supply is extremely sensitive to the electromagnetic pulse of lightning, so it is easy to cause damage, so pay attention to the SUP power supply when using it. Well-effective shielding and ground protection.

3. Note that the discharge protection should protect the UPS uninterruptible power supply to discharge it, and it is also required during the discharge process. Therefore, pay attention to the process of discharge from discharge until the protection of the shutdown, do not turn it on this time, otherwise it will cause over-discharge of the battery, but should be turned on after UPS re-charge.

4. Establish a reasonable maintenance service period Any device is used in the process of use, and the UPS power supply is no exception. Therefore, the company has to give good management on UPS, it should establish a reasonable maintenance and overhaul cycle, including regular inspection of the use of environmental hygiene, temperature and humidity, and power operations, and settings of various parameters, and to determine Provide technical supported operators at any time so that there is a problem with problems.

The UPS uninterruptible power supply should be understood in use. 2, UPS uninterruptible power supply for three months or initial use, should charge for more than 10 hours to ensure battery life. 3, Municipal Electric Socket - Distribution Discharge 220V Power Cord and UPS Output Wires To design the load current design, do not use too thin power cord.

4, pay attention to prevent output short circuit and more than rated load. 5, when the inverter is working, the output is square wave, which is not appropriate to access the sensive load (such as electric fan, electric drill, etc.) 6, due to the surge current of the DC power supply in the printer, so the backup method When power is powered, both devices cannot be started at the same time.

Otherwise, UPS will automatically shut down due to overload protection. The above is a matter that the UPS uninterruptible power supply should pay attention to when used. Since the UPS power supply is very important about some devices, the company should choose a regular UPS power manufacturer when purchasing, so that the quality of the UPS power supply, then Pay attention to these matters during use to ensure the service life of the UPS power supply.

Summary: Users will inevitably encounter most of the possible problems that can be encountered in the process of using the UPS uninterruptible power supply. Summary of the following precautions helps users can better use UPS uninterruptible power supplies to extend the life of the UPS power supply. .