Analysis of the top ten precautions for resettlement of variable frequency power

2022/04/08

  Author :Iflowpower – Portable Power Station Supplier

For security considerations, frequency conversion power supply, 60Hz power supply, 400 Hz power supply, frequency conversion voltage regulatory power supply, and other products need to pay attention to the following points, because the environmental installation of the inverter power supply is straightforward and its service life is straight Impact. The importance of the inverter power supply should pay attention to the following points: 1, the speed is good, the efficiency is high. At low speed, the static level rate is high, and the relative stability is good.

2, the use of the inverter use ambient temperature is generally suitable at -10 ¡ã C ~ 40 ¡ã C, humidity in environmental work below 90. If the ambient temperature is higher than 40 ¡ã C, each liter is 1 ¡ã C, the inverter should be reduced by 5. The ambient temperature is 10 ¡ã C per liter, and the inverter has a long life, so the problem of surrounding ambient temperature and inverter heat dissipation must be handled.

3, all power products such as variable frequency transformer power supply, transformer voltage, etc. should be kept from fire and high temperature to prevent temperature too high. 4, alert fuel, salt to the erosion of variable frequency power supply.

5, place the variable frequency power supply in a good ventilation, at least 30 cm from other objects around it to keep the ventilation ventilation. 6, the normal operating environment of the variable frequency power supply is 0 ¡ã C ~ 40 ¡ã C, the humidity of 0 to 90% (non-condensation state) 7, preventing the variable frequency power supply from being included in the corrosive gas and vibration, magnetic field interference. 8 to prevent the converted power supply from being placed in direct sunlight, rain or moisture.

9. Do not place 60 Hz power, 400 Hz power and other various power products in uneven or tilt. 10, when the inverter drives standard motors, and compared with the power frequency power supply, the loss will increase, and the effect is deteriorated when the low speed is resistant, and the temperature rise of the motor will increase.

Therefore, the load torque of the motor should be reduced at low .

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English