6 tips can extend the life of the drone battery

　　Author ：Iflowpower – Portable Power Station Supplier

The discharge curve of the lithium-ion battery indicates that when the discharge is started, the voltage drop is faster, but the discharge is between 3.9 to 3.7V, the voltage drop is stable.

However, once it is reduced to 3.7V, the speed of the voltage will speed up, the control is not good, resulting in over, lightly damaged the battery, and the calorific voltage is too low. If you don't pay attention to the protection of the battery, it is often over, the battery life will be greatly shortened.

Take UAV can monitor battery usage from flightgoApp real-time battery. By default, when the battery remaining is less than 30%, a low power alert will trigger. When the remaining battery remaining is too low, FlightGoApp will pop up a serious low-power alert.

The aircraft will automatically enter the return and land to the return point to ensure battery performance. 1, with a dedicated charger. 2.

Place the charging battery and charger with a secure location. The Take charger uses Qualcomm QC3.0 fast charge technology, and the use of a supporting power adapter can be quickly charged.

Qc3.0 Fast charging state The charging status indicator is flashing for the green light. If you don't match the use of a supporting power adapter, you may not meet the fast charging effect, you can only charge slowly.

The charging status indicator is flashing in the orange light in a slow charging state. The battery cannot be full of power storage time, otherwise the phenomenon that can cause a bulk bag during use. After determining the flight task, then charge, if there is no flight task within 3 days, please discharge.

If there is no TAKE battery in two months, the battery should be charged and discharged, and the battery life should be maintained, and the battery life should be extended. Battery storage should be placed in a cool environment. When the battery is stored for a long time, it is best to be placed in a sealed bag or sealed in the release box, it is recommended to have a ambient temperature of 10 to 25c, dry, non-corrosive gas.

The outer packaging of the battery is an important structure that prevents battery explosion and leakage. Battery should be lightly put. When installing a battery on a Take drone, make sure that the battery warehouse is buckle, preventing loose falling during flight, resulting in accidents.

Short-circuit will directly lead to fire or fire explosions. In the process of transporting the battery, it should be prevented from being placed together with a metal object such as the key. The best way is that each battery is separately set on the bag and placed in the explosion-proof box, preventing the short circuit due to bumps and collisions during transportation.

There is often low temperature weather in the north or high altitude. If the battery is placed in a long time, the discharge performance will be greatly reduced. At this time, you cannot control the flight as a normal temperature state.

Battery insulation processing The battery is saved in a warm environment before takeoff, such as houses, in the car, insulation box, etc. Please preheat the battery to 5C or more to be used on the aircraft, preheating to 20C or more. Please do not use the environment below 0C, otherwise it may be irreversible damage to the battery.

Quickly install the battery before departure, and perform flight missions. When shortening the time ambient temperature is low, the battery usage time may be suddenly reduced. Try to shorten the flight time to half of the normal temperature state to ensure flight safety.

.