What is the UPS battery protection?

　　Author ：Iflowpower – Onye na-ebubata ọdụ ọkụ nwere ike ibugharị

UPS Battery Protection Treatment Measures 1. Switching Subsites In order to prevent UPS in order to prevent UPS, it should be powered by the BA, then turn on the Load, then turn on the load by one bypass operation. Alert load current on the impact of UPS, so that the use of UPS is extended.

The order of the shutdown can be seen as the reverse process of the boot order, and the first turn off the load one by one, then close ups. 2. Pay attention to the total power of the load, not greater than the rated power of UPS.

The UPS homework should be in the overload condition to ensure that the UPS can work properly. 3. After the shutdown, the UPS battery pack is powered and automatically turned off.

Do not use the UPS battery pack to power the power, and damage the battery due to excessive discharge. When the city is abnormal, it should turn the load and shut down in time, and the electricity recovery will be turned on immediately. 4, the use environment is similar to the computer's work environment, the UPS is not very high on the requirements of the ambient temperature, usually can work properly at 0 ~ 40.

But the dust problem is also plagued with UPS, UPS's application environment requires cleaning, dust, boring, dust, and humid environment to cause UPS homework. The UPS battery pack is high, the temperature is 25, the temperature is 25, and it is best not to exceed 15 ~ 30 size. 5, battery protection UPS battery pack will have self-discharge phenomenon, if it is placed for a long time, it will cause damage to the battery pack, so charge and discharge.

If it is used, any gas does not occur during normal application, but if the user is improperly operated, the battery pack is excessive charging, and the gas is increased, and the internal pressure of the battery pack is increased. Status, when the battery is tourd, deformation, leakage, and even if this phenomenon should be replaced, the battery pack should be replaced immediately. 6, pay attention to safety because the UPS battery pack voltage is very high, there is a certain electric shock risk to the human body, so it should have security guarantees when loading and unloading the conductive adapter, and the output line should be insulated, especially the output contacts should have alert.

Electric shock setting. 7. The charging voltage is in the charging process of the UPS.

When the charging voltage is abnormal, the battery equipment data may occur. Therefore, when the battery pack is used, it must pay attention to the correctness of the battery standard and quantity, different standards, and different brands of batteries should be tried to mix. The external charger is also best not to use low-cost inferior products.

8. The charging current is similar to the voltage requirements of the UPS. When charging and disculating the UPS battery pack, it should be tried to pass through the excessive current.

Although there is a time division UPS battery pack can accept a certain degree of large current, it is still necessary to prevent the battery polar panel in practice, which will cause the battery to increase, and the battery capacity will be severely decreased. , Cause a large shortened battery pack life. The above is the main situation and treatment of the domestic UPS battery protection.

The general use of UPS, its battery life is 3 to 5 years, but there is a suitable part of the UPS battery in China in less than 1 year to show problems, this Aspect, the original, because the lack of necessary protection after the day. It is worth noting that many units are not clear from the lack of necessary detection protection techniques, and the underlying system is not clear about the health of the UPS battery, leaving hidden dangers for the UPS system.