Electric vehicle lithium ion battery packing precautions

著者：Iflowpower – ຜູ້ຜະລິດສະຖານີພະລັງງານແບບພົກພາ

Electric Vehicle Lithium Ion Battery Package Precautions First Step: Check that all connected quality during the removal battery, check if the safety seat, charge socket, and electric vehicle lithium-ion battery lead line contact is normal, and fastened All connections. To replace it should be replaced, and you should focus on the reliability, and unreliable should be replaced. Step 2: Installation To install the lithium-ion battery of electric vehicle according to the instructions in the battery pack.

In fact, each of the batteries inside the battery cell box is connected in series, with a soldering iron solder of each piece of a soldering iron with a copper wire without less than one square, and finally two output terminals are positive and negative. , Welding two segments in the output socket, pay attention to not to be reversed, must correspond to the positive and negative poles on the charger. Otherwise, the consequences are serious.

Step 3: After the installation of the electric vehicle lithium-ion battery pack, measure the battery output port voltage with the multimeter, the actual voltage of the battery is slightly higher than the standard voltage, and the normal operation can be put into normal operation.