How to activate long-term 48V lithium iron phosphate ion battery pack

著者：Iflowpower – Mofani oa Seteishene sa Motlakase se nkehang

The problem of activation of the 48V lithium iron phosphate ion battery pack is: Charging time must be more than 12 hours, repeated three times to activate lithium-ion battery pack. This first three-three charging will charge 12 hours or more, it is clearly the statement that the nickel battery continues. Ji ber vê yekê ev cûre gotin, hûn dikarin bêjin ku destpêk xelet e.

The charge and discharge characteristics of the lithium iron phosphate ion battery and nickel cells have a very large difference, and it can be very clear to tell everyone, all serious formal technical information that Xiaobian review emphasizes the charge and over-discharge will for lithium ions. Battery group, especially liquid lithium-ion batteries cause huge damage. Therefore, it is best to charge according to standard time and standard measures, especially for more than 12 hours of long charging.

Bi gelemperî, rêbaza barkirinê ku di manuala rêwerzan de hatî pars kirin, rêbaza barkirinê standard e. First, the series method is connected in series on the entire group of 12 volts 12 volts. For example, the original car is a battery of 48V-20AH, then we will join a 12V-20AH battery in series.

A high 12V battery voltage is about 13V, which can improve the voltage of the lithium phosphate ion battery pack after series, and then charge it with his original charger, so that it can be charged in, plugging in a charging After the device, the charger is a red light. At this time, it can be charged in. When the charger is turned green, take the other series of batteries, and then charging it.

Second, the parallel law, such as the vehicle originally 48V-20AH battery, and we will join a group, 48V-20AH battery. Everyone understands that the voltage across the parallel circuit is equal, high voltage ends flow into low voltage ends. This approach is also the way many of the battery dealers in tested the complete battery.

Then charging can also achieve the purpose of charging. This principle keeps, in series, the principle is similar, but also to improve the voltage of the whole group. Third, the low-voltage charging method selects a small model charger for charging.

For example, it is a group of 60V-20AH batteries, then we charge with 48V-20AH chargers. In this case, it can be charged. The principle is also similar to the first, and the voltage of the charging voltage and the battery is closer.

Fourth, single battery charging method charging single battery with 12 volts, can activate lithium ion batteries, but this charging is slow, generally charge for more than 7 hours, battery voltage will slowly rebound To 12V. If all single items charge time. 5.

Special charger method selection automatically identifies battery voltage, no matter how many volts of a set of battery voltages, you can automatically identify the voltage, he can charge it in. For example, the original car is a battery of 60V-20AH. This is only 30V, which can be charged inside.

As the voltage increases, it is also suitable for a higher level of voltage, and then charging the battery.