How to reduce battery failure?

Auctor Iflowpower - Dostawca przenośnych stacji zasilania

Maintenance and maintenance of lithium-ion batteries must not be taken lightly, do a good job in the maintenance of lithium-ion batteries, can reduce battery failure and improve their stability. Improve the battery life by maintaining the battery. Previous maintenance, usually replace all of the batteries, so the waste is very.

In practice, we found that the multi-cell cell in a set of batteries can be reused, but only the quality of the minority is not. Therefore, the battery will be used to save money, reduce costs. With the continuous development of the power supply, the intelligence is getting higher and higher, and the charging and discharge, overvoltage, overcurrent, etc.

of the battery pack can be monitored in real time, thereby reducing unnecessary losses, improving the maintenanceability of lithium-ion batteries. , For the stable operation of the self-control system, a reliable guarantee for stabilization. Only properly, maintenance can always maintain a good operating state, effectively extend its service life, and better supply adequate spare power for equipment.

Battery systems, such as battery systems used in Uninterruptible Power Supply (UPS), can minimize troubleshooting, and ensure smooth operation in key usage programs (such as medical facilities or systems supplied to computer center). To be professionalized and detected equipment to detect their status and maintenance. Such devices must not only meet ergonomic and intuitive operations, but also to be rugged, widely used, such as Gossenmetrawatt lead-acid battery detectors Metracellbtpro.

Battery life prolonged measures typically, portable and multi-function detection instruments are ideal for assessing and maintaining battery systems and uninterruptible power supplies, this is based on lead-acid batteries. Lead batteries account for more than 75% of the world's current rechargeable energy storage equipment. Due to the availability of large capacity in some cases, several battery blocks are usually interconnected.

However, since each block is connected in series, a single defective battery, the internal resistance is too high, and the charging voltage of the neighboring block is added, thereby reducing the service life of the entire series. MetracellBtPro can record voltage (voltage up to 24VDC), and battery resistance and electrochemical resistance, as an initial start and periodic detection reference measurement. In addition, the total voltage of up to 600 V DC is measured, and interval recording (measuring voltage and current) can be performed, for example, during discharge.

The instrument can store up to 300,000 data records, which can be managed by the included battery management software, and can be read in the form of expressive reports.