What is the use of UPS power storage battery?

2022/04/08

  Author :Iflowpower – Portable Power Station Supplier

1 Standard UPS UPS UPS is generally no load test function in the main market, relying on the fuse. In the case of the main market power supply, the UPS power battery may continue to work, but when the market is abnormal, the UPS is turned off due to overload protection, which will cause UPS damage. The above situation will cause output interruption to bring certain losses to users.

Therefore, it should be confirmed before using a standard UPS power source. When using normally, if there is no market disruption, the battery should be charged every 3 to June, discharge it once, after discharge, standard UPS charging time should be not less than 10 hours. 2 Long-acting UPS UPS UPS Due to the extension of the power supply time, the good and bad pen of the external battery is directly affected by the discharge time of the UPS power battery, so it is necessary to pay attention to the quality of the battery when using long-acting UPS.

And maintenance. The battery is correct when the battery is connected; first input to the UPS, the charging voltage is input, and then the battery is connected to the host. 3 All UPS batteries are in use because there are high voltages that exceed the human body tolerance within the UPS battery.

If the fault occurs, if it is not grounded, it may cause its metal shell to charge, harm the human body; in addition, some equipment Zero, the voltage between the ground is high, if not, it will make zero, the voltage is too high, so that the equipment can not work even damage; when using normal use, if there is no market disruption, UPS The battery should be placed every March, charge it once, after the discharge is complete, the UPS charging time should be no less than 10 hours; if the UPS power battery is in a long time, it should be carried once every March, discharged once; UPS battery The external environment requires 22-28 ¡ã C for direct shooting and doing dust-proof resolution; under room temperature, the sealing lead-acid battery life is 3-5 years, and should be based on the actual situation Purchase and pre-use status debugging for standby batteries.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English