+86 18988945661
contact@iflowpower.com
+86 18988945661
Author :Iflowpower – Portable Power Station Supplier
18650 Lithium Ion Battery Repair Method 1, remove your 18650 lithium ion battery, remove it, treated with temperature, the battery will greatly shorten the usage time in the case of unstable temperature, because the battery is no electricity and quite part Lithium ions have been memorized to use this way to release the memory, in winter, put it outside, then go to the house. 2, there is a method, remove the battery, put a week, will slowly consume the electricity, first use the machine to completely consume. Then all the rush, I estimate that your current charging time is definitely very short, after full, disconnect, repeated a few times, absolutely effective.
Lithium-ion battery repair method 1: Long-term 18650 lithium-ion battery's metal surface will have a certain degree of oxidation, leading to the mobile phone battery and mobile phone, and the use of lithium-ion batteries is shortened, while rubber or other Cleaning tools can erase the surface of the rust, so that the battery and mobile phone contact. Lithium ion battery repair method 2 Principle: Low temperature energy changes the electrolyte of 18650 lithium ion battery, promoting chemical reactions that have just been frozen. The use of lithium-ion batteries is actually a charge and discharge process.
During this time, the negative charge and Yang electric charge in the battery collide with each other. The battery is getting more and more unused because in normal room temperature, the kinetic energy of the electronics is relatively large, so the battery is active, and the leakage is relatively frequent. The lithium-ion battery is placed in a low temperature environment, the microstructure of the lithium-ion battery surface and the microstructure of the electrolyte, and their intersection, resulting in the interior of the battery, which is not active, leakage current reduction.
So after charging again, the mobile phone will add new. The principle of lithium-ion battery repair method three: depth discharge to mobile phones, is to achieve deepest and reproduction by depleting internal energy, this is to adopt some unconventional methods. If you want to connect your mobile phone with a 1.
5V light bulb, the 18650 lithium-ion battery will be transmitted to the small bulb until all are light. 18650 Correct use of lithium ion batteries 18650 Lithium-ion battery usage environment: temperature at 0 ~ 40 ¡ã C, relative humidity is not more than 75% clean, dry, ventilated environment, should prevent contact with corrosive substances, away from fire And heat source. Charging Notes: Products are strictly prohibited from discharge junction columns, which must be charged from the charging socket using a special charger.
When the charging indicator on the charger stops scrolling, remove the charging plug in time to avoid the battery over charge. The normal cycle of the lithium-ion battery is approximately 500 ~ 800, and the lithium-ion battery to the life-ending lithium-ion battery should be recovered and treated according to local law. The lithium-ion battery will not be filled, it has internal circuit protection, and the lithium-ion battery is most fear of excessive problems, more than 40 degrees of temperature reduces the amount of power that the lithium-ion battery can be charged.
18650 activation of lithium-ion batteries does not have a special method, and the lithium-ion battery will naturally activate during normal use. If you insist on the three 12-hour long charging activation methods to be used in the first three times, it will not actually have effects. Charging according to the standard time and standard program.
Don't charge, over-charge for a long time. Some people promote lithium-ion batteries to charge for 12 hours. However, the lithium-ion battery does not do this, and such practices will affect the life of lithium-ion batteries.
Copyright © 2023 iFlowpower - Guangzhou Quanqiuhui Network Technique Co., Ltd.