+86 18988945661
contact@iflowpower.com
+86 18988945661
Author :Iflowpower – Portable Power Station Supplier
First, the UPS uninterruptible power supply host should have a strong habit of the power grid environment to set up a UPS, first to think about it to the complex grid environment habits, including the habit of dragging by diesel engine. The functional target to be examined has an input voltage promise to change the scale, input power factor and UPS two-way anti-ambition. When the input voltage promises to change the scale hour, the UPS will enter the battery power supply.
When the input power is low, it means that there is a large nonlinear current component, which will not only damage the environment, but also the capacity equipment for power supply and transmission. Expansion, bad energy; anti-hanketing power contains disturbances formed by the various disturbances in the power grid and the reverse to the grid. How to improve the performance of UPS uninterrupted power supply II.
UPS's habits of various loads can refer to routines such as voltage ammage, waveform distortion, frequency ammoil, dynamic echo, backup transition time, etc. Is it possible to run properly under some special load equipment?. For example, a strong-capacitive load, impact load, rectifier filter input load, with a load of the same power linear transformer input.
To examine the function target with nonlinear load (output power factor), tape with periodic impact load (Peak Stem) \ Belt randomous impact load (overload or short-circuit endurance and maintenance), three-phase imbalanced load can wait. Third, progressive battery functions, strengthen the battery about the battery. Now some leading UPS vendors do their homework in this area is very effective.
For example, according to the physical chemical characteristics of the battery, monitor the battery charging status at any time. After the software is set up, the battery is placed, the battery is floating voltage, and the battery is heat exchanger under normal operation. Fourth, the flexibility and redundancy function of the system equipment can be used in parallel when a UPS capacity is not satisfied, in order to advance, it can adopt multiple redundant equipment, this is modular in the UPS system equipment.
Skills, multiple parallel technology, skewers of concurrent redundant skills, bypass repair skills, etc.
Copyright © 2023 iFlowpower - Guangzhou Quanqiuhui Network Technique Co., Ltd.