Author ：Iflowpower – Portable Power Station Supplier
There are many types of laptop, and different battery properties will be different. Today's laptop generally use lithium-ion batteries (or similar products); short-term personal computers, A4 type laptops use NiMH batteries under the premise of temporary use; in the middle of the 1990s, nickel Cadmium battery. After the user bought a notebook, first, please take a look at the operating instructions, which is confirmed which.
If there is no manual, you can check the battery specifications through the homepage of the manufacturer. The maximum problem with the memory effect of nickel-hydrogen batteries and nickel-cadmium batteries "is the memory effect", if the battery is not used up, when charging is charged, the battery is used next time, There is no electricity to the place where you start charging. If this process is constantly loop, the battery life will be shorter and shorter.
Although the memory effect of the nickel-hydrogen battery is smaller than the nickel-cadmium battery, it is also the original reason why it is repeated to shorten the life. Therefore, please try to use the battery to be fully charged. Lithium-ion batteries have no memory effect, so even if it is changing in the middle of the intermittent, there will be no big problem.
Extending the use of battery life Although the lithium ion battery has no memory effect, it will greatly affect life. Use a lithium-ion battery to pay attention to the following points: Do not use the AC power drive in the state of the Ocean to be more likely to be aging. In particular, use the AC power driver when the overflows will bring a lot burden on the battery.
At the same time, it also adds hot amount to further accelerate the aging of the battery. Therefore, when temporarily uses a laptop, once the electricity is filled, it is best to use the battery power. The manufacturer proposes to remove the battery when using the AC power (but if the battery is removed, it is not necessary to pay attention to accidents that occur, there is no saved data when unplugging the power outages or cables.
). Factors affecting battery life using power saving functions are charging and discharging. In order to minimize the number of charging, the power saving function of the laptop can be used (when driving, the screen brightness is dimmed, the CPU speed is reduced to reduce power consumption).
The same truth, when there is electricity, it is best not to charge, and all the batteries are all used. It is completely discharged once in a few months, and there is a trick to complete the battery once every month. The detailed approach is to use the battery to zero power, stop using the zero electricity, connect the AC adapter, and then do not use the personal computer,.
Some personal computers have battery discharge (Batteryrefresh function ". If you think that the battery is very difficult, you can try the battery discharge function. When it is not used for a long time, unplug the AC adapter for more than 8 hours, please unplug the AC adapter in order not to give the battery.
In addition, if you don't have to be used for more than a month, please remove the battery from the machine and place it in a cool place. When is replacing the battery? The criterion of replacing the battery is only about 6% of the original capacity after charging. Since there are many types of batteries, it is not to buy the model on the personal computer being used.
In addition, it is best not to buy presets in advance, because even if not, the battery will naturally lose. There is no need to buy genuine batteries in this chance, but the service that is currently being used to restore its performance. "Baysun" is one of them, and the performance of the battery can be restored.
This method is not only cheap, but it is especially convenient to use in the manufacturer without inventory, or the battery attached to the second-hand laptop.
Copyright © 2023 iFlowpower - Guangzhou Quanqiuhui Network Technique Co., Ltd.