How to extend the use of laptop lithium batteries

　　Author ：Iflowpower – Portable Power Station Supplier

There are many types of laptop, and different battery properties will be different. The current laptop generally uses lithium-ion batteries (or similar products); shortly personal computers, A4 type laptops use NiMH batteries under the premise of temporary use; and nickel nickel before the mid-1990s Cadmium battery. After the user bought a notebook, first, please take a look at the operating instructions, which is confirmed which.

If there is no manual, you can check the battery specifications through the homepage of the manufacturer. The maximum problem with the nickel-hydrogen battery and nickel-cadmium battery has a memory effect of NiMH and nickel-cadmium batteries that the memory effect is that when the battery is not used up, when charging is charged, it is used next time. There is no electricity in that place to charge.

If this process is constantly loop, the battery life will be shorter and shorter. Although the memory effect of the nickel-hydrogen battery is smaller than the nickel-cadmium battery, it is also a cause of shortening the life, so please try again to recharge the battery. Lithium-ion batteries have no memory effect, so even if it is changing in the middle of the intermittent, there will be no big problem.

Extending the use of battery life: Although the lithium ion battery has no memory effect, it will greatly affect life improper use. Use a lithium-ion battery to pay attention to the following: Do not use the AC power supply | Regulator | Regulator driver with no charge, not fully charged, not fully charged. Especially when fully charged, use AC power drivers, it will bring a lot burden on the battery.

At the same time, it also adds hot amount to further accelerate the aging of the battery. Therefore, when you temporarily use a laptop, once it is full of electricity, it is best to use the battery power. The manufacturer recommends removing the battery when using the AC power (but if the battery must be removed, you must pay attention to the unexpected data when the power outage or cable is unplugged, will lose no saved data).

Factors affecting battery life using power saving functions are charging and discharging. In order to minimize the number of charging, the power saving function of the laptop can be used (when driving, the screen brightness is dimmed, the CPU speed is reduced to reduce power consumption). The same truth, when there is electricity, it is best not to charge, and all the batteries are all used.

It is completely discharged once in a few months, and there is a trick to complete the battery once every month. The specific approach is to use the battery to zero electricity, stop using the zero electricity, connect the AC adapter, and then do not use the personal computer, charge the electricity. Some personal computers have battery discharge (Batteryrefresh).

If you think that the battery is very difficult, you can try the battery discharge function. When it is not used for a long time, unplug the AC adapter for more than 8 hours, please unplug the AC adapter in order not to give the battery. In addition, if you don't have to be used for more than a month, please remove the battery from the machine and place it in a cool place.

When to replace the battery? The standard for replacing the battery is only about 6% of the original capacity after charging. Since there are many types of batteries, you must purchase the model on the personal computer being used. In addition, it is best not to buy presets in advance, because even if not, the battery will naturally lose.

Now there is no need to purchase genuine batteries, but to discharge the battery currently being used to restore its performance. Baysun is one of them, and the performance of the battery can be restored in one week. This method is not only cheap, not only the price is cheap, but it is especially convenient to use the battery that is not in stock, or the battery attached to the second-hand laptop.