How to charge the aircraft lithium ion battery pack?

2022/04/02

  Author :Iflowpower – Portable Power Station Supplier

Amount lithium-ion battery pack charging ● Charging current: charging current must not exceed the maximum charging current specified in the specification (in general, using higher than recommended current charging) will cause lithium ion battery packs Discharge performance, mechanical properties and safety performance, and may result in fever or leakage. At present, the 5C current charging of the market is charged, and it is proposed not to use 5C charging to avoid affecting the battery life. ● Charging voltage: The charging voltage must not exceed the specified limit voltage (4.

2V / monomer battery), 4.25V is the highest limit of each throttle voltage. (It is strictly forbidden to use direct charge charging.

● Charging temperature: The battery is not charged within the ambient temperature specified by the product specification, otherwise the battery is susceptible to damage. When it is found that the battery surface temperature is abnormal (referring to the surface temperature of the battery exceeds 50°C) Stop charging immediately. ● Reverse charging: Correctly connect the positive and negative of the battery, which is strictly prohibited to charge reverse.

If the negative is reversed, the battery will not be charged. Reverse charging will cause the battery to be destroyed, even leading to heat, leak, and fire. Lithium-ion battery pack discharge ● Discharge current: Discharge current must not exceed the maximum discharge current specified by the specification (acknowledgment), excessive current discharge can cause the capacity to reduce and cause the battery to overheelectrically expand.

● Discharge temperature: The battery is discharged within the operating temperature range specified in the specification. When the surface temperature of the battery exceeds 70°C When you are temporarily stopped until the battery is cooled to room temperature. ● Over-discharge: Over-discharge can cause battery damage and discharge the voltage of the unit cell without less than 3.

6V.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English