Author :Iflowpower – Portable Power Station Supplier
● Correctly to charge the new battery has always had such an error, and the newly bought electric vehicle must be overflowed for 12 hours, and the lithium-ion battery can be activated 3 times. In fact, this will not only make lithium ion battery performance better, but also accelerate the damage of lithium-ion batteries. Regarding the new lithium-ion battery, do not special ways, as long as 3-5 normal charge and discharge, the lithium-ion battery can be activated, and the normal battery capacity is restored.
● The power is too low, and many netizens are charged in time. In fact, this is also a mistake. If during driving, the electric vehicle has indicated that the electricity consumption is too low.
If it is still not charged, the lithium-ion battery is likely to cause the voltage too low because of excessive discharge, thus damaging the lithium-ion battery. Life, so charging should be charged in time when prompted. Choose a regular processor, there is a compliance product logo, pay attention to the processing date of the lithium-ion battery.
A lot of three-free lithium-ion battery, in order to save costs, there is a problem with quality. Prevent empty costs from being stored for a long time, but also prevent overcharge. Prevent exposure and rain.
Try to store electric vehicles in a special parking place in order to transport lithium ions, the interface not only has a high degree of electron insulation, but also ionic conductivity, which is critical. In addition, the interface is not ultra-thin to prevent the energy density of the battery. In order to address these challenges, the team cooperates with Brookhaven National Laboratory (BrookhavennationalLab) and Colleagues in CityUniversityofnewyork.
The boron nam boron nam boron nam boron namide (BN) nano film deposited is deposited as a protective layer, and the electrical contact between the metal lithium and the ionic conductor (solid electrolyte) is separated, and a small amount of polymer or liquid electrolyte penetrate electrode / electrolytic interface. Select BN as a protective layer because it is stabilized with metal lithium in chemistry and mechanical, supplying a high degree of electronic insulation. Designing the boron nitride layer has intrinsic defects, and lithium ions can pass it, make it an excellent separator.