Author ：Iflowpower – Portable Power Station Supplier
How to use and maintain the vehicle-mounted UPS battery power supply • Car UPS batteries are generally used on special vehicles and modified cars, important for uninterrupted power supply guaranteed on important vehicles and loads. About how to use the right use and maintenance of the onboard UPS power supply system, it is a knowledge point to understand this article. First, how to use the vehicle-mounted UPS battery power supply system? Car UPS: Car UPS battery is an electric energy conversion device for standard communication (AC220V / 50Hz) on a vehicle, using a battery.
Important is used to power the equipment to be powered on the vehicle, and the car UPS solves the problem of communication in the vehicle. Car UPS Battery Correct Usage: 1. 2, appropriate discharge, help the battery activation, such as long-term non-stop market, every three months should break away the city's electric vehicle UPS with load, this can extend the battery life.
3. Keep the suitable ambient temperature of lithium ion batteries. The best ambient temperature required by the general battery manufacturer is between 20-25 ° C.
4, use communication function. Install the appropriate software on the car, connect the UPS through the string / parallel port, run the program, can communicate with the vehicle-mounted UPS battery. Generally have information queries, parameter settings, setup, automatic shutdown and alarms, etc.
5, the most important point, strictly operate in the UPS power supply, to ensure that the UPS battery can be in an orderly manner. 6. Reasonably select the installation location of the vehicle-mounted UPS battery, a good installation location is very important, can choose different installation methods according to the space on the car, usually we choose the rack installation method, save a space and footprint.
Ok, in addition to these car battery UPS skills, there is also a method of preventing overloading, doing real-time monitoring, etc. After we will slowly, then, let's talk about the maintenance of the vehicle UPS lithium-ion battery. Second, The maintenance of the vehicle UPS lithium-ion battery is small, the use of the vehicle UPS battery is the same, the service life of the extended UPS battery is not small things, can't fall.
The host of the UPS is in the core, and the usual special care is also it, but it is often ignored that another important component of the battery is often not maintained, it is no longer concerned. It is necessary to understand that a UPS without a battery is not available. It is not possible to supply electricity protection.
It is only a regulator, but also white power consumption. 1, regularly maintain the car UPS. Clear dust in the machine, measuring the voltage of the battery pack, replace the unqualified battery, check the system parameters of the fan operation and the detection adjustment UPS, etc.
2, lithium-ion battery is installed as possible in clean, cool, ventilated, dry place, and prevent the battery from being affected by sunshine, heating or radiant heat source, let the battery have a good job, storage environment. 3, the UPS battery should generally be charged in the range of 5 ° C ~ 35 ° C, which will reduce life below 5 ° C or higher than 35 ° C. The setting voltage of charging should be within the designated range, such as exceeding the designated range will cause battery damage, Capacity is reduced, shortened life.
4, the vehicle-mounted UPS power supply is free for a long time, the battery should be charged once 3 ~ 6 months. It can be seen that the correct use and maintenance of the vehicle-mounted UPS battery is enhanced, and the service life of the battery is extended, and the UPS power supply system failure rate is reduced, and the UPS lithium-ion battery uses the correct usage method and maintenance. Will greatly extend its service life.
Copyright © 2023 iFlowpower - Guangzhou Quanqiuhui Network Technique Co., Ltd.