+86 18988945661
contact@iflowpower.com
+86 18988945661
Author :Iflowpower – Portable Power Station Supplier
Do you know? Problems about whether or not to activate polymer lithium batteries have always been controversial. Some netizens think that the general lithium-ion battery does not have to be activated, assuming that the battery is standing for too long, you can charge a few hours after the charge is charged. More than 12 hours will not work.
Everyone knows the common sense that the first three charges were charged 12 hours to the original nickel-cadmium batteries. Lithium ion battery is not because lithium ion batteries have no memory effect. Experts say: The small current charge for a period of time during the generalization process, for the formation of the SEI film of the electrode, which is of course the charger of ordinary users can't be completed, if there is really activated this, then this important Procedure, how can producers will be handed over to users? So the user reflects: according to practice experience, the lithium battery needs to be activated, because the memory effect is not recoverable, but if the lithium battery is not activated, the problem can be recovered.
Regardless of the digital device standard, the lithium battery is enabled, it must be activated. Many users are using a lithium battery process, no scientific activation, causing lithium batteries to achieve optimum capacity, easy to make people think that this is a memory effect. The general battery has the following activation process: activation process One: The lithium battery just used is usually the remaining power, do not charge this time.
Use the battery into the product normally until the power is as low as it is completely unable to turn it. Activation process 2: First charging, it is best to use the original charger to charge, and the shutdown charge is better, many people are convenient to use, not shut down, which is not conducive to activating lithium capacity. And remind everyone to continue to charge for 12 hours or less.
If the prompt is already full, don't pull it, let it keep the state of charge! Activation process three: After the first is full of electricity, if you use it normally until you can't boot. Can be followed according to the process two! Activation process four: completely discharge, fully charge (ie, the two and processes of repetition processes) repeated three times. At this time, the battery is activated and can achieve the best capacity state.
Precautions are: Lithium batteries are often activated when they leave, so they don't need buyers to activate again. If the activation period is recommended not to use the universal charger. If you reach the normal use period, you can use universal chargers.
Because the original charger is the most appropriate. Universal charger, current is not stability, with lithium battery voltage is not necessarily consistent, there is a possibility of accelerating lithium battery aging. .
Copyright © 2023 iFlowpower - Guangzhou Quanqiuhui Network Technique Co., Ltd.