Author ：Iflowpower – Portable Power Station Supplier
Early failure of the UPS battery is 1. Early failure of the UPS battery means that the battery pack is in the process of use, but only a few months or 1 year, and the performance of individual batteries has a sharp deterioration, and the capacity is below the rated value of 80%, resulting in Early failure of the UPS battery is the same as the electrolytic solution in the battery and the electrolyte in the AGM partition. 2, UPS battery performance life long depends on the material, industrial environment, active material purity combination and use environment and maintenance, etc.
3, the UPS battery that appears in a set of UPS batteries is generally caused by individual accidental factors in the processing, such as in the welding pole group, there is a small lead particles fall into the pole group, and the amount of acid is controlled. Strict, unqualified parts are loaded, some raw materials are unsuitable, etc. UPS Battery Failure News (1) Clean all the battery top; (2) Classify the battery according to the same brand, the same model classification; (3) Take the appearance, corrosion, or the full provision of the leakage, this part Not repaired; (4) According to the even sequence, it is conducive to connecting the positive and negative poles; (5) connect the battery with a connecting strip; (6) Connect the charger to the positive and negative poles; (7) Charging an hour, test After the UPS battery is discharged, the test is not a short-circuit circuit condition; (8) When the repair condition is reached, the discharge system is connected according to the requirements; (9) Adjust the standard data of the discharge system, so that the standard data of the battery; (10) When the discharge is started, the deionized water is added to 1: 1, and 10% of the regenerative agent is added, and the charge is charged for 16 hours and then discharges the circulation.
Copyright © 2023 iFlowpower - Guangzhou Quanqiuhui Network Technique Co., Ltd.