18650 reasons for charging electricity and processing repair

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - Proveïdor de centrals portàtils

1. Internal charging circuit fault, not charging normally. 2,18650 There is a fault internally in the lithium ion battery.

3, the battery electrode is contacted, the contact resistance is too large, resulting in a large voltage drop, when charging, the host is full, stop charging; 18650 battery rechargeable processing method: 1. Charger interface aging or charger itself. Replace the new charger for detection.

2, the quality of the charging line has problems. Replace the new line. 3.

The metal in the packed hole is oxidized to cause contact, belonging to a hardware failure, and should be specific overhaul after sales. The battery itself is exhausted or damaged, and the battery is replaced. 18650 Lithium-ion battery repair method: 1.

After the battery is completely used, the battery is taken down, and the temperature is used to produce. When the temperature is unstable, the battery can greatly shorten the usage time, because the battery is not electrified, and the lithium ion is large. Memory, so you can release some internal storage in the winter to the outside, and then go back to the house.

2, another way is to remove the battery, put it on one side, about one week so that power consumption will be very slow. It must first be completely consumed by the machine. Then use it with it, it is estimated that your charging time is very short, it will be cut, and then repeated several times, it must be effective.