What should I pay attention to in assembling polymer lithium battery cells?

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - Soláthraí Stáisiún Cumhachta Inaistrithe

In terms of electrical core, there is a method of hitting the aluminum-plastic composite film, the top seal edge (the pole edge edge edge edge), the side edge, and the handle maintenance and alert mechanical hit, short circuit method. 1. Aluminum-plastic composite film outer packaging maintenance: It is damaged by sharp partial injuries and is damaged.

To this end, the perimeter of the battery should be cleaned up, and the sharp part can be touched or touched the battery. When you use it, you can wear gloves, guard my fingernail scratching the external table. 2, the top edge and side edge cover maintenance: for the alert, damage to the top edge and side edge edge, damage to the sealing, should stop the bending top cover and side edge seal; together, the battery planning is necessary to take reliable insulation Blocking method is short-circuited by alert negative electrode and aluminum-plastic composite film.

3, polar handle maintenance: polymer lithium ion battery cell positive electrode extraction terminal is selected from the aluminum pole, and the negative electrode drawing terminal is selected from the nickel handle. Because the polar handle is thin, bending should be stopped; together, the alert handle should be in contact with the aluminum-plastic composite film during processing, and the ferrule film is strictly blocking it. 4, alert mechanical hit, such as fall, impact, bending battery and accidental battery.

5, stop metal, wire short circuit connection is negative. .