What should the UPS lead-acid battery need to pay attention to?

　　Author ：Iflowpower – Onye na-ebubata ọdụ ọkụ nwere ike ibugharị

Ready to work. Distilled water. The tools are: modified cone, absorption (can be used in one-time needle tube), translucent polyethylene tube, diameter, suitable straw (needle tube) suction, ABS glue.

On the top cover of the UPS battery. There are still some fillers around the rubber cap, pay attention to the filler. Insert the preformed distilled water with a dropper, inject distilled water from the exhaust hole.

Electrolytic solution to add 1.5cm from the liquid hole. The lead-acid battery exhaust hole of the electrolyte is masked with a gas permeability to prevent dust and fall.

After standing for 24h, check whether there is an active electrolyte (free acid) inside the exhaust hole, if there is no additional distilled water. The lead-acid battery 6 monohydrophone should be normal, and it should be different from each lead-acid battery, and the level of loss of lead acid is. In summary, in the entire repair process, it should ensure that there is an active electrolyte in each single-generation of the lead-acid battery.

Maintenance-free battery due to its own advantages, the consumption of the electrolyte is very small, basically do not replenish distilled water during service life. It also has the characteristics of high temperature resistance, high temperature, small size, self-discharge. The service life is generally twice the general battery.

.