Analyze the connection skills of UPS battery packs

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - Προμηθευτής φορητών σταθμών παραγωγής ενέργειας

1. First, the mind is clear, the UPS battery is installed, there is less, don't have a heart, the connection method must be clear, the mobile phone proposal when installing, does not chat with customers, more can't answer the film A series of questions, this will be distorted, it is easy to do; Or hold the palm of your hand, alert to the place where you should not take, causing a fire; Playing a little fire on the pillar and connecting, not to make a big disaster; or measure the differential pressure of the two points to be connected, it can be connected to zero; 4, the two people are connected at the same time, the corresponding UPS battery pack No connection or potential relationship. Because the two are the same potential, the battery and the two are poorly formed, and the UPS battery and the two can form a loop, and the electric shock accident may occur; 5, after the UPS battery pack is completed, the total and total negative voltage between the UPS battery pack is compared.

High, when connected to MCCB (battery switch), each line should be connected to MCCB, then connect to the corresponding battery terminal; or leave a breakpoint in the battery pack, complete the connection of MCCB and UPS battery packs Connection breakpoint; related multi-set UPS battery packs, should be closed in each group, and use the multimeter test polarity after the MCCB terminal is connected to the breakage connection. .