18650 lithium-ion battery How is the roll?

　　Author ：Iflowpower – د پورټ ایبل بریښنا سټیشن عرضه کونکی

18650 lithium-ion battery How is the roll? 18650 Lithium Ion Battery to be scrolled after the replacement can be swim, and check the ambient temperature and humidity. General ambient temperature above 15 ¡ã C, humidity is below 40%. Indicates the pressure gauge between 0.

4 and 0.6MPa must be normal. 1.

After turning the main power switch, press the power switch and rectifier switch on the main battery. 2. Manual correction pair: front and rear correction pairs: The correction controller of the small electrical box next to the winding device is a manual state, press the SET and S.

C keys, and the screen is displayed C80. 3. Foil wear: The foil is attached to the apparatus on the spool, and it is sticky in the direction shown in Figure 3.

Pay attention to the direction of the roller, try to keep the foil in the center of the axis. 4. Opening the tension and correction: open the tension switch of the small electrical box next to the winding device, adjust the winding tension to 0.

35±0.05 scale, winding tension is 0.45±0.

05 scale. Adjust the correction sensor to see if the value on the correct display is 0 +/- 5, then lock the sensor, press the automatic access to the working state. 5.

Preparation 1) The final axis working mode on the main battery is set to be positive, continuous. 2) Adjust the rolling speed according to the process requirements. Press the event work button, wait for the foil to smooth, stop the foil.

3) Connect the roller plate with lead foil. After receiving the foil, the received foil is in an overpressure roller. After all, we should end this situation: Tip: In the 18650 lithium-ion battery roller press, a excellent roller technology personnel more emphasizes the pulping, compaction, walking speed, roller friction and winding.