What are the correct charging methods of lithium batteries?

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - ซัพพลายเออร์สถานีพลังงานแบบพกพา

The correct charging method of lithium battery is large, and the average output voltage is high. Self-discharge, less than 10% month, no memory effect. Wheel temperature range is -20 ¡ã C ~ 60 ¡ã C.

The cycle performance is superior, fast charge and discharge, charge efficiency is as high as 100%, and the output power is large. long lasting. No environmental pollution, known as green battery.

Using the correct charging method, the lithium battery can be sufficiently sufficiently charged. If the charging method is incorrect, the lithium battery is insufficient, and the capacity of the lithium battery is lowered, and the life is shortened. Method 1.

Method 2, before charging, the lithium battery should not be discharged, and the discharge will damage the battery. Try to charge electricity in slow charging, reduce fast charge mode; do not exceed 24 hours. The battery has been activated to achieve the best use effect after three to five complete charge and discharge cycles.

Method 3, please use the original factory or reputable brand charger, the lithium battery is used to use a lithium battery-specific charger and follow the instructions, otherwise it will damage the battery, and even hazard. Method 4, the newly bought battery is lithium ion, then the first 3 to 5 charge is generally referred to as the adjustment period, should charge for more than 14 hours to ensure that the activity of lithium ions is fully activated. The lithium battery has no memory effect, but there is a strong inert, it should be fully activated to ensure that the best performance can be achieved.

Method 5, the lithium battery must be used for special chargers, otherwise it may not reach the saturation state, affecting its performance. After charging, it should be prevented from being placed more than 12 hours on the charger. It should be separated from the battery and mobile electronics when it is not used for a long tim.