How to relocate the machine room UPS power host and lithium ion battery?

著者：Iflowpower – Fornitore di stazioni di energia portatili

In order to ensure the smooth transition of the computer computer room monitoring network operation system, the smooth transition of the UPS battery is not strictly implemented in the reliability of the UPS battery relocation, and the relevant work is completed in a short time, this is very Challenging. The steps and measures to share the relocation of Lithium Ion Battery UPS hosts in the following small packages. UPS Lithium Ion Battery .

jpg1, first understand the UPS host and battery device UPS host and lithium-ion battery are operating normally, but because the UPS battery pack service life has exceeded the service life. In order to prevent lithium-ion battery aging, the impact of the UPS host power supply system operation and the guarantee of the UPS backup time. 2.

Develop a relocation planning site survey→Communicate with Party A technical personnel→Determine the implementation method→Decompose equipment→Develop emergency approach. Lithium-ion battery UPS power flow is desirable to formulate before relocation, and it is necessary to understand the current system equipment situation and system operation. Develop specific relocation measures and emergency methods for what you understand.

The engineer understands the current situation of the machine room and the detailed requirements after the relocation. Plenty considering the various situations that may occur during the implementation process, customize the specific feasibility migration execution plan, minimize the impact of the equipment room migration work to the user. UPS manufacturers technical personnel should be closely matched during the relocation process.

In order to ensure the smoothness, order and security of the relocation, the specific relocation process will be developed, and the detailed division of labor is performed, and the work is arranged. 3. The organization arranges the UPS battery relocation work by the computer room information center, the overall coordination of the relocation work, 1 general guide.

The detailed division of labor is as follows: The general guidance is responsible for implementing the schedule of all units in accordance with the timetable of the relocation method, coordinating the interconnection of each unit work, and timely discover the adjustment, coordinating overall guidance. The battery construction work group is based on the battery (12 groups, 256 sections) one by one. The equipment relocation work group is responsible for safe, intact, complete equipment (battery) relocation work, removed from the original machine room, lightly transported into the new engine room, according to the position of the equipment (battery) and connected in place.

The equipment debugging workgroup consists of the original equipment maintenance unit engineer, responsible for the original lithium-based battery UPS shutdown, the UPS line, performance test, debugging. 4. Develop execution time Since the number of batteries replaced is more heavy, the weight of the battery is also relatively heavy; and considering the construction conditions of the site, the installation work has a certain difficulty, plus the preparation work before installation and installation, so there is a debugging work, so To give a certain construction time.

5, the UPS demolition step is to self-test the UPS and the battery to be relocated, and arrange the battery connection between the original battery to the new battery. Lithium ion battery UPS shutdown, measured voltage with a multimeter, confirmed that the input and output is open. Battery opening.

Detached UPS host and battery. .