How to solve the battery leakage

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - Portable Power Station Supplier

In general, the battery leakage is tight to be due to the poor sealing property between the upper cover or the bottom tank, which is the most common in daily use, and there are three factors that may cause the battery to drain, respectively. Safety valve leakage, leakage and other parts of the terminal. No matter which original battery leakage, it must be investigated in time, and solve it in time.

The battery electrolyte is very corrosive. Don't let it touch the skin or the clothes, you should immediately throw the battery, first use your hand paper to drain the night, then use the dry cloth to the alcohol or white wine repeatedly wipe two All over, it can be completely removed from the elongated electrolyte such as anhydrous ethanol, otherwise it will continue to corrode the contact of the battery. The rusty battery contacts should be used with a knife, sandpaper, and the conditions can be soldered by soldering iron to prevent corrosion.

Battery .jpg1. Check the battery appearance, check that the battery case is damaged, and many times the battery leakage is damaged by the battery in the riding process, so it is necessary to check the appearance.

Battery panel, check the condition of the safety valve, see if there is a trace of safety valve leakage, if the safety valve is leaking, it should be repaired or replaced; It is necessary to make a breathable check on the battery, pressurize in water, see if there is a bubble, if there is a bubble, there is a leakage occurred; 4. Observe the battery when charging, see if it is There is an electrolyte flow out to determine the extent of battery leakage. .