How do lithium batteries UPS maintenance?

ଲେଖକ: ଆଇଫ୍ଲୋପାୱାର - Leverancier van draagbare energiecentrales

How to maintain maintenance? Volume, weight and other parameters. Various UPs should not be fully loaded, and should retain more than 20% of the power margin, and the load control is between 40% and 60% of the UPS rated output power. 2.

When the UPS power supply is not used for a long time, it will be turned on. Relevant rear preparation UPS is recommended for every 1 month, so that the UPS work is in the inverter working state for at least 2 to 3 minutes to activate the battery, extend the battery life of the battery. When charging, you should try to prevent overcurrent and overpressure charging.

Appropriate discharge, help the battery activation. 3. Master the basic knowledge of lithium battery UPS, carefully read the equipment manual, understand the meaning of various warning information, warning code, indicator, and the cause of the occurrence and response method.

Familiar with various switches on the device, the purpose of buttons. Familiar with various operations of UPS, clear connection. 4.

Strengthen daily inspection, maintenance, check the equipment has no henabits, no abnormal flavor, have no abnormal sound, check the joint without loose hair fever, the cooling fan is normal, the equipment indicates whether the equipment is normal, and the problem is found in time. 5. Maintain a suitable ambient temperature.

Important factors affecting the life of the lithium battery UPS are environmental temperature, the best ambient temperature required by the general battery packages is between 20-25 ¡ã C. Once the ambient temperature exceeds 25 ¡ã C, 10 ¡ã C per liter, the life of the battery should be shortened. 6.

Replace the waste / bad battery in time. In the continuous operation of the Lithium battery UPS, due to performance and quality, individual battery performance has decreased, and the storage capacity is not required to be damaged. When a certain / some battery cells in the battery pack, the maintenance personnel should check each battery to test the damaged battery.

7. The use environment of the ups power supply should pay attention to the ventilation, benefiting heat, and maintain the environment clean. Do not with inductive load, such as billing machine, fluorescent lamp, air conditioning, etc.

, so as not to cause damage to the los.