Author ：Iflowpower – Portable Power Station Supplier
Lead-acid battery and lithium iron phosphate ion battery correct charging method. The lead-acid battery and lithium iron phosphate ion battery should be noted that it is absolutely inexhaustible and overcharge, so that battery life will be greatly reduced. Therefore, the lead-acid battery and lithium ion battery maintain a good working condition, extending its service life, and has a lot of practical value, regardless of environmental protection or economic perspective.
The lead-acid battery correct charging method lead-acid battery is the most taboo is to power the electric work, so that the battery life will be greatly reduced. 1. Lead-acid battery is charged when the remaining one-third of the amount of electricity is charged.
2, the charging environment should be kept dry, the charger should not be wrapped in plastic bags or plastic bottles, because when the charger can't be breathable, it is easy to burn. 3. Lead acid batteries should not use fast charge, if it is not necessary to more than two months.
4, lead-acid battery charger is placed in a fixed place, do not bump, even if it is carried, it is fully considering bumps. The lithium phosphate ion battery is correctly charged. The constant current is charged, that is, the current is constant, and the lithium phosphate ion battery voltage is gradually increased, and according to the above specification, it is generally charged.
When the battery voltage is close to full power When the voltage is 4.2V, the constant current charge is constant pressure. This process is about five hours.
2, constant voltage charging, that is, the voltage is constant, and the current gradually decreases with the degree of saturation of the battery, according to the specification, when the current decreases to 0.01c, it is considered to be charged. After this process and constant current charging time, the total charging time should not exceed 8 hours.
3. 4. About the charger of lithium iron phosphate ion battery pack, it is best to use the manufacturer's special charger equipped.
Don't use other chargers such as other models or charging voltage uncomfortable. 5, after the lithium phosphate ion battery is charged, try to prevent it from being placed over 10 hours on the charger, such as the mobile phone and lithium-ion battery separation should be used for a long time. 6, the charger can only protect the entire battery package voltage, balancing the charging board is to ensure that each monomer is overcharged, and it is not possible to stop the entire lithium iron ion because there is a battery.
Battery pack charging. .
Copyright © 2023 iFlowpower - Guangzhou Quanqiuhui Network Technique Co., Ltd.